I did a cleaning of this machine and a day later the copies turned black. Prints and internal reports are fine. Checked optics and connections. Lamp does come on. Mirrors are in position ok. HAs anyone seen this?
-
-
Re: Kyocera Copy star CS 305 Black copies prints are fine
Reset the scanner lock. It will prevent the scanner from going to the scanner start position with no errors. -
Re: Kyocera Copy star CS 305 Black copies prints are fine
Thanks brother! Will check and see.Comment
-
Re: Kyocera Copy star CS 305 Black copies prints are fine
Just had the client check the position of the scanner lock and it was unlocked . I had them lock then unlock then reset the machine and still same thing. Not sure what else? This is a real puzzler.Comment
-
Re: Kyocera Copy star CS 305 Black copies prints are fine
It sounds like a dust ball or something worked it's way into the light path. I would try re-cleaning the optics...But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.
Comment
-
Re: Kyocera Copy star CS 305 Black copies prints are fine
There is a bulletin regarding this exact issue, requires replacing the main board from Kyocera if under warranty. Thtere are repair centers thar also repair this problem as well. A transistor array that controls the CIS on/off signal fries and needs to be replaced.Comment
-
Re: Kyocera Copy star CS 305 Black copies prints are fine
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Paul@justmanuals.comComment
-
Re: Kyocera Copy star CS 305 Black copies prints are fine
Unfortunately kkendric is correct. You may also get errors C3200. Replace main PWB. Error C0180 appears on power up (serial number mismatch). Run sim U004 to restore serial number on main PWB. Re-enter network and addressbook data.
When you move the machine around, make sure you don't lock the scanner. It's easy to do. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment