km-1650

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zoraldinho
    teacher-guide-expert-guru

    Site Contributor
    5,000+ Posts
    • Mar 2008
    • 5014
    #1

    km-1650

    Hello

    I'm not kyocera guy so i need a advice.I have all manuals for this model but i'm still not sure about it.Command center is password locked and company have new IT guy.I already try default password.
    Canon have function for reset pass in service mode.Do we have something similar here?

    Thanks in advance.
    Last edited by zoraldinho; 12-13-2013, 03:04 PM.
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    Tags: None
    • zeeeba
      Technician

      50+ Posts
      • Dec 2012
      • 58
      #2
      Re: km-1650

      If, You have service manual execute : "Initialize all memory" in service mode. Now I'm not remember what is exacty it is i This U020, U021 or U022 one of these is that procedure, but be carefull : if Your machine has ADF, after this procedure You must do adjustments for lead edge for scan/copy.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23008
          #3
          Re: km-1650

          The default is: no authentication at all

          The memory clear, or engine reset PreScribe command are about the only way to reset that password. If you do the memory clear, don't forget to reset the destination (U252 or maybe U265) which is the badge: Kyocera, Copystar, Utax, Olivetti, etc. (Copystar: 66, Kyocera Mita: 2, Utax: 11, Olivetti: 12)

          =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • zoraldinho
              teacher-guide-expert-guru

              Site Contributor
              5,000+ Posts
              • Mar 2008
              • 5014
              #4
              Re: km-1650

              Me again

              One more stupid question! I use U020 Initializing all data and U021 Initializing memories.Scanner admin pass is still there.I'm gona throw this peace of s..
              If it ain't broke, don't fix it
              A picture is worth a thousand words

                Comment

                • zeeeba
                  Technician

                  50+ Posts
                  • Dec 2012
                  • 58
                  #5
                  Re: km-1650

                  When you initialize U020 or U021 The password was not deleted but it is resseted to default. If I remember the default password is 1600 or 2500

                    Comment

                    Previous template Next
                    Working...