Kyocera KM - 4035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jeromeblanks
    Technician
    • Jul 2010
    • 13

    #1

    [CQ] Kyocera KM - 4035

    I have a KM-C4035 internal prints are fine and off the glass is fine but when I use the ADF I get intermittent CQ sometimes pages are blank sometimes heavy background and sometimes washed out copies never a clear copy any suggestions
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23008

    #2
    Re: Kyocera KM - 4035

    Ok Jerome. There is no model KM-C4035. If it's in the Voyager or VoyagerE series it's got to be either:
    KM-C2520, KM-C3225, KM-C3232, KM-C2525E, KM-C3225E, KM-C3232E, or a KM-C4035E

    If its a Falcon II series it could be a:
    KM-3035, KM-4035, or KM-5035

    Lets start by choosing a valid model, then proceed from there. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • eliza925994
      Technician
      • Jun 2014
      • 14

      #3
      Re: Kyocera KM - 4035

      Kyocera KM - 4035 - please use this.
      Max. original size:A3
      Continuous copying:1-999
      Memory capacity:Standard 64 MB, max. 64 MB + 20 GB HDD (with HD-70)
      Zoom range:25-400% in 1% steps (with DP: 25-200%)
      Preset magnification ratios:21R / 9E

      Comment

      • eliza925994
        Technician
        • Jun 2014
        • 14

        #4
        Re: Kyocera KM - 4035

        check your printing setting and then print. or uninstall the printer then install the printer again then printer has default setting and print the paper. sometimes printer current pages print which is selected by setting.you must select all the pages. to change the setting. and open control panel then open printers and faxes then check setting.
        Kyocera Copiers in Brisbane

        Comment

        Working...