I have a KM-2050 that sat in storage for a while. Made good copies when we first started using it. After 50 or so copies the copies got lite like the machine was out of toner. Toner is full. Have heard dampness can cause this. What is the fix. I vacuumed out the developer unit and ran U130 but same problem. Help
-
-
Re: KM-2050 Light copies
A drum refresh couldn't hurt, but I don't really think that's it. Most likely there's a layer of ozone on the mirrors which happen to be directly over the fuser. Also check the slit glass. Clean all optics with 99% alcohol. As a preventative measure I have used foam to fill the crevasses around the left side covers, to minimize ozone exposure. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: KM-2050 Light copies
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Paul@justmanuals.comComment
Comment