Anyone here how to reset toner cartridge error "non-genuine toner"? I have purchase this brand new copier and my friend recommended me to refill my cartridge if "replace toner" message flashes but after refilling the "non-genuine toner" flashes. My friend uses the same toner but it works for him. Please help. Thanks!
-
-
Re: kyocera mita taskalfa 1800
You got bad advice. These cartridges are chipped. Which means that it remembers that it's empty, forever, or until it sees a new chip.
And what exactly did you refill it with? If it's not OEM (Original Equipment Manufacturers) toner, you are going to have a wide variety of problems that I won't even go into right now.
The thing to do, is to throw away that cartridge. Then go to the store and but a new Kyocera toner cartridge, then install it. If you succeed in making any copies with that other crap in the cartridge, you'll have much bigger problems. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment