COPYSTAR CS-300i---message on screen reads "can not use stapler due to failure. no other codes. this is a DF-780B FINISHER. CHANGED LIFT MOTER BUT DID NOT FIX. JUST SHOOTING IN THE DARK. ANY HELP IS APPRECIATE.
-
-
Re: COPYSTAR CS-300i
You're going to have to run a 906 reset first. The machine has disbled the stapler and will not work until the reset is done. After that you can troubleshoot the stapler issue.If at first you don't succeed, redefine success -
Re: COPYSTAR CS-300i
Don't just shoot in the dark. Once you've done that U906 reset, print the error log U000.
If the code pops up before you get the print ... well there you go.
Or, you could go to sim U904 to see what codes have been stored. Especially pay attention to the C8xxx codes. Those are the finisher codes. This information was available in your service manual. Then you can diagnose it just like a real copier tech. Open your manual and look it up.
=^..^=Last edited by blackcat4866; 03-12-2014, 05:38 PM.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: COPYSTAR CS-300i
I do not understand, the stapler portion of a finisher does not work so you change the lift motor?Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: COPYSTAR CS-300i
I wonder if there is a point for kids to go to technical colleges to actually learn something. Or they will solely rely on the vast data availability online.
Comment
Comment