KM-5035 Legacy Model

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jeromeblanks
    Technician
    • Jul 2010
    • 13
    #1

    KM-5035 Legacy Model

    I have a KM-5035 that has intermittent CQ problems. Sometimes I get a 4 to 5 inch void in the middle of the page when doing a lage copy job over 500 when running under a 100 copies at a time it works perfect. The DV Unit , high voltage board, power supply and drum has been replaced no change and power has been tested also.

    Any Ideas
    Last edited by jeromeblanks; 04-04-2014, 12:12 AM.
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22929
      #2
      Re: KM-5035 Legacy Model

      How about a sample? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • stevena86
          Trusted Tech

          100+ Posts
          • Oct 2012
          • 130
          #3
          Re: KM-5035 Legacy Model

          Samples would really help as Blackcat stated. Also, only things to cause voids are the laser unit glass being dirty or the transfer section. Check your transfer roller.

            Comment

            • thekeg19
              Technician
              • Jul 2008
              • 29
              #4
              Re: KM-5035 Legacy Model

              Did you replace main charge w/drum unit? Youtr post didn't specify.

                Comment

                Previous template Next
                Working...