CS-5050 Jams J14 every time

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22932
    #1

    CS-5050 Jams J14 every time

    Talk about a totally stupid thing downing a machine: this CS-5050 keeps trying to pick up from an empty bypass tray. Why? Because a plastic C-clip was installed backwards. The flange on the clip lifts up the PE flag when the lift clutch rotates. Paper appears to be present, and it attempts to feed the imaginary paper. J14 results.

    FalconIII MP Tray1.JPGFalconiii MP Tray2.JPG

    This is the way the clip should be installed.

    FalconIII MP Tray3.JPG

    Sorry, it appears that the photos came out upside-down. Stand on your head while viewing photos. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Tags: None
    • Venom
      Technical/IT Support

      500+ Posts
      • Nov 2009
      • 765
      #2
      Re: CS-5050 Jams J14 every time

      That is a rookie mistake...obviously didn't check it well
      IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22932
          #3
          Re: CS-5050 Jams J14 every time

          I won't dispute that. Fortunately I wasn't that rookie. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            Previous template Next
            Working...