FS-C2526MFP error C6000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zoraldinho
    teacher-guide-expert-guru

    Site Contributor
    2,500+ Posts
    • Mar 2008
    • 4999
    #1

    FS-C2526MFP error C6000

    Hi,

    I'm canon tech and need some help with with this color machine.I assumed that the rolled paper in the fuser cause of the error but the error is still present.In service manual does not say anything about resetting this error.I check service mode on the machine several times.Some ideas maybe?
    Thanks in advance!
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    Tags: None
    • Zackuth
      Trusted Tech

      250+ Posts
      • Aug 2009
      • 448
      #2
      Re: FS-C2526MFP error C6000

      These models do not have a fuser reset. If you're still getting a code you need to replace the fuser.
      If at first you don't succeed, redefine success

        Comment

        • zoraldinho
          teacher-guide-expert-guru

          Site Contributor
          2,500+ Posts
          • Mar 2008
          • 4999
          #3
          Re: FS-C2526MFP error C6000

          Crap! This is first jam.Machine have total counter 1080 copies.Just don't get it! Thaks Zackuth.
          If it ain't broke, don't fix it
          A picture is worth a thousand words

            Comment

            • Zackuth
              Trusted Tech

              250+ Posts
              • Aug 2009
              • 448
              #4
              Re: FS-C2526MFP error C6000

              The rolled paper must have broke or damaged a sensor.
              If at first you don't succeed, redefine success

                Comment

                • zoraldinho
                  teacher-guide-expert-guru

                  Site Contributor
                  2,500+ Posts
                  • Mar 2008
                  • 4999
                  #5
                  Re: FS-C2526MFP error C6000

                  Broken sensor can't be a reason for error but termistors looks ok.
                  If it ain't broke, don't fix it
                  A picture is worth a thousand words

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22930
                      #6
                      Re: FS-C2526MFP error C6000

                      How about the obvious? The wrapped paper insulates the thermistor from the heat roller. Temperature continues to rise until it blows the thermostat. This thermostat can't be so unique that you can't scrap one. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • zoraldinho
                          teacher-guide-expert-guru

                          Site Contributor
                          2,500+ Posts
                          • Mar 2008
                          • 4999
                          #7
                          Re: FS-C2526MFP error C6000

                          Thanks for the obvious but usually machine have protection so if in a few seconds can't reach specified temperature throws error code.
                          If it ain't broke, don't fix it
                          A picture is worth a thousand words

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 22930
                              #8
                              Re: FS-C2526MFP error C6000

                              Originally posted by zoraldinho
                              Thanks for the obvious but usually machine have protection so if in a few seconds can't reach specified temperature throws error code.
                              You're welcome. It's my specialty. =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                Previous template Next
                                Working...