General Falcon engine question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Scottb
    Trusted Tech

    Site Contributor
    VIP Subscriber
    250+ Posts
    • Apr 2013
    • 303
    #1

    General Falcon engine question

    Ok so I have seen this little filter that is taped to the dv unit when it comes in a maint kit. Where does this guy go I have looked in the parts book but well there are only so many filters and this one does not show up in the pdf search.


    Thanks,

    Scott
    Tags: None
    • darry1322
      Senior Tech

      Site Contributor
      500+ Posts
      • Oct 2010
      • 817
      #2
      Re: General Falcon engine question

      Sounds like the filter that goes into the top of the DV unit. Long and narrow, black plastic with white filter material?

        Comment

        • Scottb
          Trusted Tech

          Site Contributor
          VIP Subscriber
          250+ Posts
          • Apr 2013
          • 303
          #3
          Re: General Falcon engine question

          nope its just a black sponge like material a inch or so square. it comes in a bag and its taped to the dv unit bag

            Comment

            • darry1322
              Senior Tech

              Site Contributor
              500+ Posts
              • Oct 2010
              • 817
              #4
              Re: General Falcon engine question

              That sounds like the sponge that would be used to seal the open toner port of the old unit. It also has a white/yellow tape in there to tape the sponge to the hole. It's used to keep the old unit from spilling toner everywhere after it has been removed.

                Comment

                • Scottb
                  Trusted Tech

                  Site Contributor
                  VIP Subscriber
                  250+ Posts
                  • Apr 2013
                  • 303
                  #5
                  Re: General Falcon engine question

                  yep that sounds like it thanks it has sort of bugged me for the last 4 years not knowing where this went and I have meant to post but always forgot by the time i got back to the shop.

                  Thanks

                  Scott

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22973
                      #6
                      Re: General Falcon engine question

                      Originally posted by darry1322
                      That sounds like the sponge that would be used to seal the open toner port of the old unit. It also has a white/yellow tape in there to tape the sponge to the hole. It's used to keep the old unit from spilling toner everywhere after it has been removed.
                      Confirmed that. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • JR2ALTA
                          Service Manager

                          Site Contributor
                          1,000+ Posts
                          • Feb 2010
                          • 2029
                          #7
                          Re: General Falcon engine question

                          Wow, to think we used to actually have PM kits!!

                          One box, one part number brought your copier from zero to hero in 45 minutes.

                          Sure made refurbing machines a lot easier.

                          Konica Minolta refurbs are a crap shoot....a long, tedious crap shoot.

                            Comment

                            Previous template Next
                            Working...