FS-C2126MFP Processing & washed out

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tmaged
    Owner/Service Manager

    Site Contributor
    1,000+ Posts
    • Oct 2008
    • 1863
    #1

    FS-C2126MFP Processing & washed out

    We have 4 or 5 of these that the Processing light is flashing & the engine is cycling, but nothing comes out. Sometimes it will be 15 minutes. Cycling power will immediately print the job. It's happening on copies & prints both. We've added expansion memory etc. I was thinking possibly bad temp/humidity sensor ?
    Also, does anyone have a fix for the washed out prints ? Shaking the DV units brings it back.
    The full updates have already been done to these units.
    Hope that helps !
    -Tony
    www.dtios.com
    Become a fan on Facebook
    Tags: None
    • AlbertK
      Technician

      50+ Posts
      • Jul 2014
      • 90
      #2
      The product may be brilliant and the salesperson proficient, but if the technician isn’t efficient, then the story will end there.

        Comment

        • tmaged
          Owner/Service Manager

          Site Contributor
          1,000+ Posts
          • Oct 2008
          • 1863
          #3
          Re: FS-C2126MFP Processing & washed out

          Yeah, the 41 page update & firmware have been done.
          Hope that helps !
          -Tony
          www.dtios.com
          Become a fan on Facebook

            Comment

            • AlbertK
              Technician

              50+ Posts
              • Jul 2014
              • 90
              #4
              Re: FS-C2126MFP Processing & washed out

              Did you get it sorted ?...

              When the machine is idling, what does it display? Processing or please wait or adding toner ?
              The product may be brilliant and the salesperson proficient, but if the technician isn’t efficient, then the story will end there.

                Comment

                • tmaged
                  Owner/Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Oct 2008
                  • 1863
                  #5
                  Re: FS-C2126MFP Processing & washed out

                  It turns out that a few of these had the spring missing that puts pressure on the feed unit pick up tires. The machine will just keep trying to pick up the paper without showing a jam.
                  Hope that helps !
                  -Tony
                  www.dtios.com
                  Become a fan on Facebook

                    Comment

                    • Foxhound
                      Technician
                      • Mar 2014
                      • 33
                      #6
                      Re: FS-C2126MFP Processing & washed out

                      Run Dv Refresh several times and eventually you will gain density back. this model is trickle developement and if coverage causes the dv res. to run out it needs a devloper refresh. I have solved the same issue by doing this. you may need some spare toner good luck.

                        Comment

                        Previous template Next
                        Working...