How do I use the Kyocera full simulation in turkey for this machine error?
-
-
Re: fs-3140 c100 error
WHAT MANUFACTURER? WHAT MODEL NUMBER?
<add details here>
MACHINE MESSAGE/FAULT/ERROR:
<add details: error code, jam code, meter reading>
STEPS TO RESOLVE ISSUE :
<what have you done so far?>
<what do you think is happening?>
<what are you going to try next?>
CURRENT CONDITION/STATE :
<add details>
ADVANCE SEARCH:
<what have you read in the manual?>
<what have you found in a forum search?>
<results of Google?>
If you'd like an answer this information is necessary.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: fs-3140 c100 error
Kyocera fs-3140
Error code C100
İ can't find U021 in maintenance modeComment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
The product may be brilliant and the salesperson proficient, but if the technician isn’t efficient, then the story will end there.Comment
-
Re: fs-3140 c100 error
...OH, and dont forget: 1. Remove the SKIP file in the firmware list
2. Use KM_EMRG instead of the normal DL_CTRL
3. Load DL_CTRL. directly after KM_EMRG.
Good LuckThe product may be brilliant and the salesperson proficient, but if the technician isn’t efficient, then the story will end there.Comment
Comment