FS-4200 Take up / feed roller kit replacement procedure.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3374
    #1

    FS-4200 Take up / feed roller kit replacement procedure.

    Have to replace the take up/feed rollers and separation roller of the FS-4200. My problem is that the customers creepy manager is always standing behind me and looking with eagle's eyes on what I am doing when I service his other machines.

    Have never seen a FS-4200 before and could use some info how to reach those rollers without looking too "Nooby".....

    Any hints please?

    Hans
    “Sent from my Intel 80286 using MS-DOS 2.0”

    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: FS-4200 Take up / feed roller kit replacement procedure.

      The most common thing I've seen is the enduser fiddling with with the retard roller and losing the separation spring. It would be a good idea to have one on-hand.

      For your convenience, remove the imaging components and tip the machine to the front. You can see everything just fine. Pictures? Here:

      PF roller assy.JPGRetard Roller.JPG

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3374
          #3
          Re: FS-4200 Take up / feed roller kit replacement procedure.

          Thanks Cat, you're still on XP sometimes too?

          Hans
          “Sent from my Intel 80286 using MS-DOS 2.0”

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              Re: FS-4200 Take up / feed roller kit replacement procedure.

              I don't know how much longer that I can hold out. Both my laptop and home PC are on their last legs, and I still don't like Win7 or Win8. I'm hoping for a Win10 that I can use and understand. I've got 15 years worth of documents that won't take the application transition well. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • NeoMatrix
                  Senior Tech.

                  2,500+ Posts
                  • Nov 2010
                  • 3513
                  #5
                  Re: FS-4200 Take up / feed roller kit replacement procedure.

                  Originally posted by blackcat4866
                  I don't know how much longer that I can hold out. Both my laptop and home PC are on their last legs, and I still don't like Win7 or Win8. I'm hoping for a Win10 that I can use and understand. I've got 15 years worth of documents that won't take the application transition well. =^..^=
                  What documents do you need to move?
                  I could probably knock out a small program to assit the transition.
                  No guarantee.....
                  Inauguration to the "AI cancel-culture" fraternity 1997...
                  •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22999
                      #6
                      Re: FS-4200 Take up / feed roller kit replacement procedure.

                      Adobe and .txt documents seem to translate well. But Office 2000, not so well. Usually Excel and Word. If it matters, WinXP SP3 OS. I seem to lose the formulas from the Excel spreadsheets. And the formatting on Word docs goes to hell. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • NeoMatrix
                          Senior Tech.

                          2,500+ Posts
                          • Nov 2010
                          • 3513
                          #7
                          Re: FS-4200 Take up / feed roller kit replacement procedure.

                          Originally posted by blackcat4866
                          Adobe and .txt documents seem to translate well. But Office 2000, not so well. Usually Excel and Word. If it matters, WinXP SP3 OS. I seem to lose the formulas from the Excel spreadsheets. =^..^=
                          How about an app that converts all the Excel spreads directly into a searchable database? Full screen edit notate with images an notation pointers ?
                          I thought about converting Ricoh Gooses Guide and Kyocera error codes to searchable database.
                          Inauguration to the "AI cancel-culture" fraternity 1997...
                          •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 22999
                              #8
                              Re: FS-4200 Take up / feed roller kit replacement procedure.

                              Sounds useful. What application? =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                • NeoMatrix
                                  Senior Tech.

                                  2,500+ Posts
                                  • Nov 2010
                                  • 3513
                                  #9
                                  Re: FS-4200 Take up / feed roller kit replacement procedure.

                                  Originally posted by blackcat4866
                                  Sounds useful. What application? =^..^=
                                  The application I've had on the backburner for the last few years. I have to get enough mojo to finish and debug it into a stable platform. The PDF decoder has been a challege which has slowed the project down.
                                  No excuse though, I should get the project going again...
                                  Inauguration to the "AI cancel-culture" fraternity 1997...
                                  •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

                                    Comment

                                    • blackcat4866
                                      Master Of The Obvious

                                      Site Contributor
                                      10,000+ Posts
                                      • Jul 2007
                                      • 22999
                                      #10
                                      Re: FS-4200 Take up / feed roller kit replacement procedure.

                                      I can provide a couple of test documents when you get to that stage. =^..^=
                                      If you'd like a serious answer to your request:
                                      1) demonstrate that you've read the manual
                                      2) demonstrate that you made some attempt to fix it.
                                      3) if you're going to ask about jams include the jam code.
                                      4) if you're going to ask about an error code include the error code.
                                      5) You are the person onsite. Only you can make observations.

                                      blackcat: Master Of The Obvious =^..^=

                                        Comment

                                        • NeoMatrix
                                          Senior Tech.

                                          2,500+ Posts
                                          • Nov 2010
                                          • 3513
                                          #11
                                          Re: FS-4200 Take up / feed roller kit replacement procedure.

                                          Originally posted by blackcat4866
                                          I can provide a couple of test documents when you get to that stage. =^..^=
                                          Send a couple of smaller ones an I'll see if I can kickstart the mojo...

                                          [Sorry Hansoon for hijacking the thread. I believe it's was solved by BC.....]
                                          Inauguration to the "AI cancel-culture" fraternity 1997...
                                          •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

                                            Comment

                                            • Hansoon
                                              Field Supervisor

                                              Site Contributor
                                              2,500+ Posts
                                              • Sep 2007
                                              • 3374
                                              #12
                                              Re: FS-4200 Take up / feed roller kit replacement procedure.

                                              [Sorry Hansoon for hijacking the thread. I believe it's was solved by BC.....]
                                              No problem pal. I'm interested in your project too. I'm using as much as possible W7 but for my accounting software still XP was needed until now. In the coming month I am forced to move to W7 too cause I am forced to upgrade that accounting software right now. Payed already much €€€€€ for the upgrade so no excuse not to start using it.

                                              Hans
                                              “Sent from my Intel 80286 using MS-DOS 2.0”

                                                Comment

                                                Previous template Next
                                                Working...