Panasonic DP2500 fuser code

[Guest]

I have a Panasonic DP2500 with a fuser code E04-01. Anyone tell me how to clear this code? Can it be reset? What causes this code?

[The-Peanut]

Its fuser related

check the fuse and lamps

[REHOL]

I know it's fuser related. My question is, can you tell me how to reset it or does it reset once you find the bad part and replace it?

[gordie]

Hi
This might be some help?

Code Function Check Points
E4- 01 Fuser warm-up temperature 1. Fuser Thermistor is dirty.
2. Thermistor position is incorrect.
3. Fuser temperature is low. (Adjust F6-31)
4. Thermistor is defective.
5. Fuser Lamp connector is disconnected.
6. Fuser Thermostat is defective.
7. Fuser Lamp is defective.

8. HTC PCB connector (CN716) is disconnected.

Gordie

[nmfaxman]

Have to reset in service mode.
F9-06-04

[just a tech]

Follow nmfaxman's instruction to reset. You'll be looking for the item labeled " LBP Fuser Reset "..

[Naveed Shahid]

I have a Panasonic DP2500 with a fuser code E04-01. Anyone tell me how to clear this code? Can it be reset? What causes this code?

hello brother how are u

E-04-1 i enter mode simulation with key ''Function + Original Size + 3 ''

go to f9 mode ,06 (ram initialize ) sub code 04 te reset fuser error