Panasonic DP1820 J70 jam code with adf

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MPM2140
    Technician
    • Mar 2010
    • 13
    #1

    Panasonic DP1820 J70 jam code with adf

    cleared the J93 but now I have a J70 jam code when the original comes through
    Tags: 820, adf, broken, cleared, code, door, dp1820, ect, email, internet, jam, jam code, manual, manuals, original, page, panasonic, paper, parts, service, service manual, time
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


      Paul@justmanuals.com

        Comment

        • mojorolla
          The Wolf

          2,500+ Posts
          • Jan 2010
          • 2584
          #3
          Sounds like the original detection sensor arm is broken in the top door. If ADF continues to run after page has gone through adf, this actuator is most likely the cause.
          Failing to plan is planning to fail!!!

            Comment

            • suckis
              Trusted Tech
              100+ Posts
              • Dec 2006
              • 165
              #4
              J70: The Read Point Sensor does not detect paper within a predetermined time after the original starts feeding.

              The Read Point Sensor is under the ADF cover. Did you check this out?
              ! RTFM !
              My site: http://www.e-club.gr/

                Comment

                Previous template Next
                Working...