2310 fuser web advancing issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • User Name
    Awesome Sauce

    250+ Posts
    • Nov 2009
    • 405
    #1

    2310 fuser web advancing issue

    Hey, it's me again. I'm having trouble getting the webs to advance properly on some 2310 fuser units. I can't seem to get the tension right on the metal "actuator" as the service manual calls it. I believe there was a bulletin released related to this issue and I was hoping somebody could provide me with it. If I'm mistaken about the bulletin, then any advice you may have is appreciated as well.

    Thanks!
    Just because you're not paranoid doesn't mean they're not out to get you.
    O.o

    WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.

    Tags: 310, advice, dropped, failure, fuser, issu, issue, manual, service, service manual, trouble, units, web
    • 20gaugeO/U
      Senior Tech

      500+ Posts
      • Feb 2009
      • 554
      #2
      It is bulletin M-0180i. Email me if you can't get it and I'll send you a copy.

        Comment

        • User Name
          Awesome Sauce

          250+ Posts
          • Nov 2009
          • 405
          #3
          E-mail sent.
          Just because you're not paranoid doesn't mean they're not out to get you.
          O.o

          WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.

            Comment

            • onetek
              Trusted Tech

              250+ Posts
              • Apr 2009
              • 318
              #4
              Get last upgrade kit #PJZSF274EAZ.....
              Th.

                Comment

                • TONERINMYNOSE
                  Trusted Tech
                  • Aug 2010
                  • 114
                  #5
                  When was this upgrde kit released? I still have many problems with 2330/3030

                    Comment

                    • onetek
                      Trusted Tech

                      250+ Posts
                      • Apr 2009
                      • 318
                      #6
                      Some time around september 2009.

                        Comment

                        • Waylon
                          Technician
                          • Sep 2010
                          • 26
                          #7
                          You may want to look into shanging over to the web advance drive used in the latest model of that series DP-8025/8032. There are too many variables with the original system, even with the bulletins changes it is stell prone to failure without unit specific adjusting/modifying to get to work. The new drive advancement makes use of a one way bearing instead of the metal spring tab ratcheting on a gear. I know a fuser from a DP-8025 will work in a DP-3030, but I have not yet tried intermingling the individual parts of the new and old model #'s but I think it will work.

                            Comment

                            • TONERINMYNOSE
                              Trusted Tech
                              • Aug 2010
                              • 114
                              #8
                              Waylon do you have a parts manual per chance? I only have up to 2330/3030, thats when we dropped the panasonic line.

                                Comment

                                • onetek
                                  Trusted Tech

                                  250+ Posts
                                  • Apr 2009
                                  • 318
                                  #9
                                  Fuser from a 8035 fits a 3030.The diffrance is also in the temperature management .
                                  TH.

                                    Comment

                                    Previous template Next
                                    Working...