Panasonic DP c626 display locked

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gideon
    Trusted Tech

    Site Contributor
    250+ Posts
    • Dec 2009
    • 283

    #1

    [Dead] Panasonic DP c626 display locked

    The display stock on the "workio" page and the machine never progress to the warm up, any idea? Also do you have the manual for this model? Thanks.
    Last edited by gideon; 06-08-2011, 01:48 AM.
  • PanaTech
    Technician

    50+ Posts
    • Dec 2008
    • 71

    #2
    SD card in the SD slot in the front? take them out, and check th eSC broad n c if there r SD installed, try unplug them too....

    does it have hard drive option?? If so, try unplug them... They are known for problems....if not, try unplug those on broad memories.......


    btw, i believe it is a DP-C262.

    Comment

    • gideon
      Trusted Tech

      Site Contributor
      250+ Posts
      • Dec 2009
      • 283

      #3
      Thanks, it is a c262, sorry for my dyslexia.

      Comment

      • JustManuals
        Field Supervisor

        5,000+ Posts
        • Jan 2006
        • 9838

        #4
        This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from http://www.justmanuals.com

        Paul@justmanuals.com

        Comment

        • mojorolla
          The Wolf

          2,500+ Posts
          • Jan 2010
          • 2583

          #5
          Sounds like a hard drive. Unplug it and see if machine gets to the ready state.
          Failing to plan is planning to fail!!!

          Comment

          • gideon
            Trusted Tech

            Site Contributor
            250+ Posts
            • Dec 2009
            • 283

            #6
            Thanks. The customer did unplug the hard drive and it solve the problem.

            Comment

            Working...