MPC5502: SC544 M0264371 part

[fshead]

Re: MPC5502: SC544 M0264371 part

i made a jig up with a mini side door switch and an old thermister end connector"think it was a 3pin" and security wire.
It took a bit to trip out code at least on this machine.
I dont think i could fit that other one in my tool bag, so mini one serves my need and stays in my bag in case i see that again..
I also now copy the nvram for all my 02s i service and keep them on my laptop just in case

[fuwei2422]

Re: MPC5502: SC544 M0264371 part

when the machine tall sc542 544 code fist:5810-01 02 sec:if not reset the machine you must rewrite the BCU NVRAM and install the machin NO.
thank you

[ridgemill]

Re: MPC5502: SC544 M0264371 part

when the machine tall sc542 544 code fist:5810-01 02 sec:if not reset the machine you must rewrite the BCU NVRAM and install the machin NO.
thank you

Or, use the reset fuse / switch and two wires, and then use SP5-810-02. If you are gettings these service codes, then the fuser sleeve is most likely damaged, thankfully a new sleeve comes with a reset fuse.

You ever need to replace the NVRAM to reset a fuser service code.