MP301 Updating @remote certificate ?

[mrfuser]

Client picked up a machine that has this message flashing: updating @remote certificate

Any idea how to turn this off?

I have tried settings in SP5 816 to no avail. Am I missing something?

Thanks all!

K

[LNorris]

Re: MP301 Updating @remote certificate ?

i dont have my notes in the shop with me, but there are 2 or 3 sps that you have to "undo" @remote with. i'll try to remember to pull the instructions out tomorrow.

[mrfuser]

Re: MP301 Updating @remote certificate ?

Thanks I appreciate the help . Odd thing also is if I go into admin mode it tells me I do not have privileges to make some changes . If I touch the login logout button just beeps and does nothing

[anothertech]

Re: MP301 Updating @remote certificate ?

@remote should clear by running SP5870-001 and 003, then SP5816-209, then reboot.

[ruben]

Re: MP301 Updating @remote certificate ?

If you want to get rid of the message, but keep @Remote installed, then just run SP5-870-003 then -001, and reboot.

If you don't use @Remote running SP5-816-209 will clear it completely.

[LNorris]

Re: MP301 Updating @remote certificate ?

i thought it was 209, but couldnt remember to be sure.