mpc6003 pcu problems

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 8132
    #16
    Re: mpc6003 pcu problems

    Originally posted by Sashko
    We have same problem on one MP C2003SP, see pictures.
    Quality of printing is good.

    [ATTACH=CONFIG]34051[/ATTACH][ATTACH=CONFIG]34052[/ATTACH][ATTACH=CONFIG]34053[/ATTACH]

    The 2003/2503 drum & dev life is a lot less than the 3003 & they fail almost at or before PM life!
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk
    ​

      Comment

      • Mark Bbb
        Service Manager

        1,000+ Posts
        • Jun 2012
        • 1662
        #17
        Re: mpc6003 pcu problems

        Drum could be worn due to heavier paper (teachers)
        When you replace the developer in a different way then the procedure recommend, then it might cause problems like these in the long run.

          Comment

          • slimslob
            Retired

            Site Contributor
            25,000+ Posts
            • May 2013
            • 37375
            #18
            Re: mpc6003 pcu problems

            Originally posted by Mark Bbb
            Drum could be worn due to heavier paper (teachers)
            When you replace the developer in a different way then the procedure recommend, then it might cause problems like these in the long run.
            C6003 uses an ITB. The paper never touches the drum surface.

              Comment

              Previous 1 2 template Next
              Working...