MP 4001 SC995 ERROR

[Polarbear]

Re: MP 4001 SC995 ERROR

[QUOTE=Bantams;541554]

[ATTACH=CONFIG]34825[/ATTACH]

Wrong board the one on the right D085 is for a MP3351

+1

This has been said several times already and yet the debate continues.... Mind blowing.....!

[Stetner]

Re: MP 4001 SC995 ERROR

***Update: I found and ordered the correct board and have the machine up and running. It instantly connected to the network, and all office PC's
can now print to it!!! Thank you all for the helpful comments, I probably could not have figured it out on my own.
It does have one minor little issue going on though.... It keeps displaying: Updating @Remote Certificate... in the lower left hand corner of display.
The message keeps repeating and the machine status keeps cycling from ready to Please wait and back again.
It seems to work fine, but the updating it is trying to do is a bit annoying. Any ideas? I assume it is trying to connect to RICOH servers for
something and probably has the wrong path perhaps...

[slimslob]

Re: MP 4001 SC995 ERROR

***Update: I found and ordered the correct board and have the machine up and running. It instantly connected to the network, and all office PC's
can now print to it!!! Thank you all for the helpful comments, I probably could not have figured it out on my own.
It does have one minor little issue going on though.... It keeps displaying: Updating @Remote Certificate... in the lower left hand corner of display.
The message keeps repeating and the machine status keeps cycling from ready to Please wait and back again.
It seems to work fine, but the updating it is trying to do is a bit annoying. Any ideas? I assume it is trying to connect to RICOH servers for
something and probably has the wrong path perhaps...

From Goose's Guide -

Updating @remote certificate failed - Execute SP5-801-3 (SCS clear)

[Stetner]

Re: MP 4001 SC995 ERROR

From Goose's Guide -

Updating @remote certificate failed - Execute SP5-801-3 (SCS clear)

Awesome!
Looks like that did it