Ricoh MP 3500 waste toner box full

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Woody214
    Technician

    Site Contributor
    • Oct 2015
    • 29

    #1

    Ricoh MP 3500 waste toner box full

    How do you reset this message on the Ricoh MP 3500? Does not appear to have a waste toner container in this machine. Appreciate your help!
  • sandmanmac
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Feb 2009
    • 3973

    #2
    Re: Ricoh MP 3500 waste toner box full

    Originally posted by Woody214
    How do you reset this message on the Ricoh MP 3500? Does not appear to have a waste toner container in this machine. Appreciate your help!
    You empty it from the transfer belt container.
    Any service manual for this series dating back to a 1035 from the year 1999 (or so) would tell you this

    Comment

    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37068

      #3
      Re: Ricoh MP 3500 waste toner box full

      Originally posted by sandmanmac
      You empty it from the transfer belt container.
      Any service manual for this series dating back to a 1035 from the year 1999 (or so) would tell you this
      Actually back to the A230 series models. Introduced in June 1998.

      If the box is empty but the display still does not clear, the sensor is bad. To turn it off while waiting for a new sensor, use SP 2960. Do not leave it off on a permanent basis unless you plan to make regular trips to the customer to empty the box.

      Comment

      • Bantams
        Senior Tech

        500+ Posts
        • Jun 2012
        • 603

        #4
        Re: Ricoh MP 3500 waste toner box full

        I always turn em off just check it on all visits only takes a few minutes to vac it out the sensors are too sensitive and can give false full reading even with the shitty bit of plastic they added to the blades to clean it

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37068

          #5
          Re: Ricoh MP 3500 waste toner box full

          Originally posted by Bantams
          I always turn em off just check it on all visits only takes a few minutes to vac it out the sensors are too sensitive and can give false full reading even with the shitty bit of plastic they added to the blades to clean it
          Are you aware that vacuuming will blow the sensor.

          Comment

          • TonerMunkeh
            Professional Moron

            2,500+ Posts
            • Apr 2008
            • 3865

            #6
            Re: Ricoh MP 3500 waste toner box full

            Originally posted by slimslob
            Actually back to the A230 series models. Introduced in June 1998.

            If the box is empty but the display still does not clear, the sensor is bad. To turn it off while waiting for a new sensor, use SP 2960. Do not leave it off on a permanent basis unless you plan to make regular trips to the customer to empty the box.
            With these abominations you'll be visiting to replace the developer WAY before the waste gets full.
            It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

            Hit it.

            Comment

            • Counsel
              Senior Tech

              500+ Posts
              • Aug 2011
              • 530

              #7
              Re: Ricoh MP 3500 waste toner box full

              Originally posted by slimslob
              Are you aware that vacuuming will blow the sensor.
              hehe i guess if he turns them off, blowing them out wont matter much.

              Comment

              • slimslob
                Retired

                Site Contributor
                25,000+ Posts
                • May 2013
                • 37068

                #8
                Re: Ricoh MP 3500 waste toner box full

                Originally posted by Counsel
                hehe i guess if he turns them off, blowing them out wont matter much.
                He most likely turns them off because he has already blown them.

                Comment

                • Bantams
                  Senior Tech

                  500+ Posts
                  • Jun 2012
                  • 603

                  #9
                  Re: Ricoh MP 3500 waste toner box full

                  Originally posted by slimslob
                  Are you aware that vacuuming will blow the sensor.
                  I don't vac the sensor that would be stupid lol

                  Comment

                  • slimslob
                    Retired

                    Site Contributor
                    25,000+ Posts
                    • May 2013
                    • 37068

                    #10
                    Re: Ricoh MP 3500 waste toner box full

                    Originally posted by Bantams
                    I don't vac the sensor that would be stupid lol
                    If you vacuum the box at all you run the risk of creating enough static to blow the sensor. You also fill up your vacuum filter. Just dump them in a plastic waste basket liner. I have cats. I therefore have plastic buckets with lids that the cat litter comes in that 4 gallon bags fit purrfectly. Once I dump a waste toner, I snap the lid back on. Depending on the machine, I can get anywhere from 2 to 5 machines in one bag.

                    Comment

                    • Oze
                      Ricoh Fanboy

                      1,000+ Posts
                      • Jul 2008
                      • 1663

                      #11
                      Re: Ricoh MP 3500 waste toner box full

                      Originally posted by slimslob
                      If you vacuum the box at all you run the risk of creating enough static to blow the sensor. You also fill up your vacuum filter. Just dump them in a plastic waste basket liner. I have cats. I therefore have plastic buckets with lids that the cat litter comes in that 4 gallon bags fit purrfectly. Once I dump a waste toner, I snap the lid back on. Depending on the machine, I can get anywhere from 2 to 5 machines in one bag.
                      Purrfectly...I see what u did there

                      Comment

                      • Iowatech
                        Not a service manager

                        2,500+ Posts
                        • Dec 2009
                        • 3930

                        #12
                        Re: Ricoh MP 3500 waste toner box full

                        Originally posted by slimslob
                        If you vacuum the box at all you run the risk of creating enough static to blow the sensor. You also fill up your vacuum filter. Just dump them in a plastic waste basket liner. I have cats. I therefore have plastic buckets with lids that the cat litter comes in that 4 gallon bags fit purrfectly. Once I dump a waste toner, I snap the lid back on. Depending on the machine, I can get anywhere from 2 to 5 machines in one bag.
                        Does Ricoh still send the developer disposal bags with new developer orders? I used those for emptying used toner in all the time and they worked great. I think I've still got some of them out in the stealth van.

                        Comment

                        • slimslob
                          Retired

                          Site Contributor
                          25,000+ Posts
                          • May 2013
                          • 37068

                          #13
                          Re: Ricoh MP 3500 waste toner box full

                          Originally posted by Iowatech
                          Does Ricoh still send the developer disposal bags with new developer orders? I used those for emptying used toner in all the time and they worked great. I think I've still got some of them out in the stealth van.
                          Yes.

                          Ricoh parts used to put parts in long plastic bags fro shipping. Those bags were ideal for the 35/45 and 40/50 models.

                          Comment

                          • mbolduc
                            Technician

                            50+ Posts
                            • Jun 2015
                            • 53

                            #14
                            Re: Ricoh MP 3500 waste toner box full

                            If the waste toner isn't full with message, you can clean the sensor with a rag. They are old school piso sensors.

                            Comment

                            • tec7

                              #15
                              Re: Ricoh MP 3500 waste toner box full

                              deactivate the toner full sensor. 2960* Toner Overflow Sensor [0 = No, 1 = Yes]

                              Comment

                              Working...