Pro C5100s Ghosting

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • barber782
    Trusted Tech

    250+ Posts
    • Aug 2011
    • 281
    #1

    Pro C5100s Ghosting

    Happy new year all,

    Iv got a problem Pro C5100s which is ghosting\ repeating on normal 80gsm paper.
    Machine has done around 550k. PM was done in November last year and was working fine till now.
    Leaning towards a fusing problem, ie pressure levers.
    Has anyone else had this issue? Sorry no samples.
    Tags: None
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8121
      #2
      Re: Pro C5100s Ghosting

      As machine has only done 550k fuser & drums wont have hit PM life yet, my money would be on paper settings as sugested above. However if the machine has been run mostly on heavy paper the fuser may have worn out before PM is life.

      Post a few samples that would help, the fiery calibration print out or copier ACC page for example.
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • NeoMatrix
          Senior Tech.

          2,500+ Posts
          • Nov 2010
          • 3514
          #3
          Re: Pro C5100s Ghosting

          Quenching lamps ????....
          Inauguration to the "AI cancel-culture" fraternity 1997...
          •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

            Comment

            • barber782
              Trusted Tech

              250+ Posts
              • Aug 2011
              • 281
              #4
              Re: Pro C5100s Ghosting

              301 Moved Permanently

              Sample

              Sent from my GT-I9195 using Tapatalk

                Comment

                Previous template Next
                Working...