Windows 10 SMB Scan to Folder MP 2852 Problem

[copyaction]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

Win 10 has disabled SMB1

see if you can re-enable SMB1 should work

do you happen to have the procedure for that?

[slimslob]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

do you happen to have the procedure for that?

It is a registry edit. This might help.

https://support.microsoft.com/en-us/help/2696547/how-to-enable-and-disable-smbv1-smbv2-and-smbv3-in-windows-and-windows

[rthonpm]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

It is a registry edit. This might help.
https://support.microsoft.com/en-us/...ws-and-windows

For Windows 10 you can just go into Add/remove programs and then Turn Windows features on and off. Just look for SMB1.0/CIFS File Sharing Support. Put a check in the box and then reboot when prompted.

[gkalchik]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

If the firmware is where it should be there is another thing you might try. I don't know if this holds true for Ricoh products but the area I work in now is mostly populated with Kyocera products. The problem I have been running into is setting up scanning with the Microsoft user accounts that Windows 10 seems to default to. When I add a local user account and give that user read/write permissions to the scan folder everything works ok.

[PacketSniffer]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

No one has asked if the OP is running Win10 Home Edition...

[slimslob]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

No one has asked if the OP is running Win10 Home Edition...

It shouldn't make a difference. Or at least I have no problem setting up SMB scan to Win 10 Home, i.e. my own laptops.

[sturmtrooper]

Re: Windows 10 SMB Scan to Folder MP 2852 Problem

No one has asked if the OP is running Win10 Home Edition...

My work laptop has windows 10 home on it and I was able to scan to folder with an SP3510, MPC4000 and an MP6503.

Is there something special that is supposed to be done first?