MP2501 clogged cleaning unit.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Voltageza
    Technician

    50+ Posts
    • Jun 2017
    • 71

    #1

    MP2501 clogged cleaning unit.

    Hi

    Any of you guys have come across mp2501 cleaning units getting clogged. The spiral is turning. I have replaced the complete PCU but now this unit is doing this as well.

    Any ideas??
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37502

    #2
    Re: MP2501 clogged cleaning unit.

    Are you sure that the coil is not turning? What I have seen is that paper lint will build up around the coil and clog to exit hole. Remove the drum and clean the recycler.

    Comment

    • COPIERMAN
      Senior Tech

      500+ Posts
      • Jun 2009
      • 559

      #3
      Re: MP2501 clogged cleaning unit.

      did you do a reinitialize after installing new developer unit.

      Comment

      • Voltageza
        Technician

        50+ Posts
        • Jun 2017
        • 71

        #4
        Re: MP2501 clogged cleaning unit.

        Hi
        The spiral turn with the drum if i am correct. I have cleaned the spiral 3 times before changing the complete PCU unit. Now its clogged again after 12000 copies.

        Thanks

        Comment

        • davel
          Technician

          1,000+ Posts
          • Oct 2011
          • 1105

          #5
          Re: MP2501 clogged cleaning unit.

          You may be using bad toner, is it ricoh

          Comment

          • Voltageza
            Technician

            50+ Posts
            • Jun 2017
            • 71

            #6
            Re: MP2501 clogged cleaning unit.

            Originally posted by davel
            You may be using bad toner, is it ricoh
            Yes it is.

            Comment

            Working...