If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
How did you manage to solve this? Replaced the fuser (sleeve was destroyed), replaced the bicu (as per the manual) and firmware is up to date. Still sc554. And yes, it's a mpc305 (a4 machine).
Cheers!
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
How did you manage to solve this? Replaced the fuser (sleeve was destroyed), replaced the bicu (as per the manual) and firmware is up to date. Still sc554. And yes, it's a mpc305 (a4 machine).
Cheers!
You also need to replace the fuse
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
Comment