[Dead] Dead MP C3004exSP

[Ricohchet]

Hi,

Has anyone else dealt with a dead MP C3004exSP ?

I have replaced:
AC and DC power supply boards
IOB engine assy
IOB transport assy
Operation panel
Image processing board
BCU assy

[Ricohchet]

Re: Dead MP C3004exSP

It's alive ! It was the Controller board, I didn't think it could cause the machine to be completely dead.

[TonerMunkeh]

Re: Dead MP C3004exSP

This machine can't be that old, did something happen to it?

[Phil B.]

Re: Dead MP C3004exSP

It's alive ! It was the Controller board, I didn't think it could cause the machine to be completely dead.

that's why it's called a Controller Board!

[Ricohchet]

Re: Dead MP C3004exSP

This machine can't be that old, did something happen to it?

Brand new, was just delivered to the customer a couple weeks ago.

[Ricohchet]

Re: Dead MP C3004exSP

that's why it's called a Controller Board!

I've had broken controller boards before, they have always just had some sc's never before caused a dead machine in my 20 years of service.

[copier tech]

Re: Dead MP C3004exSP

I've had broken controller boards before, they have always just had some sc's never before caused a dead machine in my 20 years of service.

When a controller fails you usually have a few tiny blinking coloured LEDS that can help diagnose

[Phil B.]

Re: Dead MP C3004exSP

I've had broken controller boards before, they have always just had some sc's never before caused a dead machine in my 20 years of service.

well I work on just about ANYTHING and have seen it quite a bit in 30+ years