MP3350 died when I replaced the drum and blade

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Blazer1087
    Trusted Tech

    100+ Posts
    • Nov 2010
    • 195
    #16
    Re: MP3350 died when I replaced the drum and blade

    Originally posted by keithxxiii
    Print and Scan is an option for this machine that's why it was able to copy. It has HDD so I assume there was an SD card inside that you might have misplaced. Check if you can have this part D383 5050 SD-Card - P/S Unit.

      Comment

      • fshead
        Service Manager

        1,000+ Posts
        • Jan 2009
        • 2360
        #17
        Re: MP3350 died when I replaced the drum and blade

        YOU CAN NOT remove anything while machine is plugged in..
        I also when working around logic brds wear a ground strap to my wrists..
        You best bet is buy a working parts machine and gut it and then swap out the nvram"while grounded".
        Follow the manual...

          Comment

          • dalewb74
            Service Manager

            Site Contributor
            1,000+ Posts
            • Feb 2018
            • 1125
            #18
            Re: MP3350 died when I replaced the drum and blade

            what happens if you unplug the copier, reinstall the fax and HDD then power on? i agree with the other post flash the firmware.

              Comment

              • Blazer1087
                Trusted Tech

                100+ Posts
                • Nov 2010
                • 195
                #19
                Re: MP3350 died when I replaced the drum and blade

                Originally posted by dalewb74
                what happens if you unplug the copier, reinstall the fax and HDD then power on? i agree with the other post flash the firmware.

                  Comment

                  • copyaction
                    Senior Tech

                    Site Contributor
                    500+ Posts
                    • Oct 2007
                    • 985
                    #20
                    Re: MP3350 died when I replaced the drum and blade

                    Originally posted by keithxxiii
                    Print and Scan is an option for this machine that's why it was able to copy. It has HDD so I assume there was an SD card inside that you might have misplaced. Check if you can have this part D383 5050 SD-Card - P/S Unit.

                      Comment

                      Previous 1 2 template Next
                      Working...