MP W2401 PS CODE SC-406

[JDYAL]

Re: MP W2401 PS CODE SC-406

Also check the developer gear cover, have had this thing not allow the machine to make proper gear contact and cause problems. I'll attach image.201904080907.pdf

[Polo-022]

Re: MP W2401 PS CODE SC-406

Developer gears have been checked for blockage, slipping, or partial breakage.
I have never had to replace a motor too.

[JDYAL]

Re: MP W2401 PS CODE SC-406

Not sure if you solved your problem but I was thinking about a machine I had that with a similar problem. It ended up being a worn drive gear. The inside of these gears are brass and had worn completely. This machine had about 500,000 linear feet on it. I will attach an image. Hope this helps.

[Polo-022]

Re: MP W2401 PS CODE SC-406

Not sure if you solved your problem but I was thinking about a machine I had that with a similar problem. It ended up being a worn drive gear. The inside of these gears are brass and had worn completely. This machine had about 500,000 linear feet on it. I will attach an image. Hope this helps.

I use to check all these gears very often for corrosion and lubricate them with G501 Ricoh Grease, internally.
Thanks a lot JDYAL!
It seems that problem has gone, today i had a communication with my customer, he said everything works fine...
What's next??