mp c2051 print density control

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hani
    Junior Member
    • Jun 2019
    • 4

    #1

    mp c2051 print density control

    how to control toner density in print mode to make it darker or lighter ? ricoh mp c2051
    i tried dv bias and ld power
    the only way that works with me forced toner supply many times to reach VT to 2 or less.
    i cleaned laser and id sensor
    counter 30000
    thanks
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37319

    #2
    Re: mp c2051 print density control

    Originally posted by hani
    how to control toner density in print mode to make it darker or lighter ? ricoh mp c2051
    i tried dv bias and ld power
    You can change bias levels and Laser diode power until you die from frustration and it will have absolutely no effect until you change SC 3041-001 and SC3041-002 from Control to Fixed your changes will be ignored and the values computed by Process Control will be used.

    Comment

    • hani
      Junior Member
      • Jun 2019
      • 4

      #3
      Re: mp c2051 print density control

      Originally posted by slimslob
      You can change bias levels and Laser diode power until you die from frustration and it will have absolutely no effect until you change SC 3041-001 and SC3041-002 from Control to Fixed your changes will be ignored and the values computed by Process Control will be used.
      of course i did fixed process control before changing dv bias and ld power . thanks

      Comment

      • davel
        Technician

        1,000+ Posts
        • Oct 2011
        • 1094

        #4

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37319

          #5
          Re: mp c2051 print density control

          Originally posted by hani
          of course i did fixed process control before changing dv bias and ld power . thanks
          In the future you need to provide any and all information as to what you have tried.

          Comment

          • vargue
            Trusted Tech

            250+ Posts
            • Oct 2011
            • 404

            #6
            Re: mp c2051 print density control

            ياعم انت اكيد شغال بحبر تعبان عمرها محتظبط معاك كونترست

            Comment

            • Phil B.
              Field Supervisor

              10,000+ Posts
              • Jul 2016
              • 22798

              #7
              Re: mp c2051 print density control

              Originally posted by vargue
              ياعم انت اكيد شغال بحبر تعبان عمرها محتظبط معاك كونترست
              CTN is based in USA...

              seems you like to post in your countries lang...

              some of here don't CARE to learn your language and unwritten rules here like to see posts in ENGLISH...

              so until you can start posting in english..

              you will continue to receive red flags and get your rep power dinged.

              this has been reported to admin

              Comment

              • mikadonovan
                Senior Tech

                Site Contributor
                2,500+ Posts
                • May 2008
                • 2931

                #8
                Re: mp c2051 print density control

                Originally posted by vargue
                ياعم انت اكيد شغال بحبر تعبان عمرها محتظبط معاك كونترست
                Translation:You are sure to be working in the ink of a long-tempered taban with Contrast. I don't know what a taban is, but I suppose a long-tempered one is better than a short-tempered one.
                NEVER ASSUME ANYTHING

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 37319

                  #9
                  Re: mp c2051 print density control

                  Originally posted by Phil B.
                  CTN is based in USA...

                  seems you like to post in your countries lang...

                  some of here don't CARE to learn your language and unwritten rules here like to see posts in ENGLISH...

                  so until you can start posting in english..

                  you will continue to receive red flags and get your rep power dinged.

                  this has been reported to admin
                  I like to call him vague since even when he posts in English he is hard to understand.

                  Comment

                  • GIUBOSS
                    Service Manager

                    Site Contributor
                    1,000+ Posts
                    • Jul 2013
                    • 1385

                    #10
                    Re: mp c2051 print density control

                    are you sure there are no mechanical problems and that you have the latest firmw. uploaded ??

                    Comment

                    • vargue
                      Trusted Tech

                      250+ Posts
                      • Oct 2011
                      • 404

                      #11
                      Re: mp c2051 print density control

                      بص يا صاحبي الكروت الحمره والحجات دي لاتنفعني ولاتضرني ولا هخش بيها الجنه ولا انت اللي برزقني الله ربي هو خالقي ورازقي انا بخدم الناس لاني ديني يئمرني اني اخدم الناس من غير مقابل مادي ياريت تفهموا الكلام ده الدنيا مش بقيالكم
                      قال رسول الله صلي الله عليه وسلم خير الناس انفعهم للناس صدق رسول الله صلي الله عليه وسلم فيمن بلغه عن رب العزه جل وعالا

                      شغللك حيروح زوجتك حتروح عمللك الخير هو اللي يبقي ياريت تفكروا

                      Comment

                      • mikadonovan
                        Senior Tech

                        Site Contributor
                        2,500+ Posts
                        • May 2008
                        • 2931

                        #12
                        Re: mp c2051 print density control

                        Originally posted by vargue
                        بص يا صاحبي الكروت الحمره والحجات دي لاتنفعني ولاتضرني ولا هخش بيها الجنه ولا انت اللي برزقني الله ربي هو خالقي ورازقي انا بخدم الناس لاني ديني يئمرني اني اخدم الناس من غير مقابل مادي ياريت تفهموا الكلام ده الدنيا مش بقيالكم
                        قال رسول الله صلي الله عليه وسلم خير الناس انفعهم للناس صدق رسول الله صلي الله عليه وسلم فيمن بلغه عن رب العزه جل وعالا

                        شغللك حيروح زوجتك حتروح عمللك الخير هو اللي يبقي ياريت تفكروا
                        I agree with everything that you said (I think) with one exception: If I told my wife she was my servant, I'm pretty sure she would get pissed.
                        NEVER ASSUME ANYTHING

                        Comment

                        • vargue
                          Trusted Tech

                          250+ Posts
                          • Oct 2011
                          • 404

                          #13
                          Re: mp c2051 print density control

                          The wife is not his goods or something taken from the husband as it was before Islam women have their own money and independent financial edema. And their own. It has the right to terminate the marital relationship by mutual consent. If the person betrayed his wife's response to her mind by applying God's limit. Good. The wife who cares about her husband and love him and provide him with everything he needs to cross his servant

                          Comment

                          • anothertech
                            Service Manager

                            Site Contributor
                            1,000+ Posts
                            • Nov 2007
                            • 1759

                            #14
                            Re: mp c2051 print density control

                            Originally posted by vargue
                            بص يا صاحبي الكروت الحمره والحجات دي لاتنفعني ولاتضرني ولا هخش بيها الجنه ولا انت اللي برزقني الله ربي هو خالقي ورازقي انا بخدم الناس لاني ديني يئمرني اني اخدم الناس من غير مقابل مادي ياريت تفهموا الكلام ده الدنيا مش بقيالكم
                            قال رسول الله صلي الله عليه وسلم خير الناس انفعهم للناس صدق رسول الله صلي الله عليه وسلم فيمن بلغه عن رب العزه جل وعالا

                            شغللك حيروح زوجتك حتروح عمللك الخير هو اللي يبقي ياريت تفكروا
                            Бид хятад хэлээр ярьдаггүй

                            Comment

                            • mikadonovan
                              Senior Tech

                              Site Contributor
                              2,500+ Posts
                              • May 2008
                              • 2931

                              #15
                              Re: mp c2051 print density control

                              Originally posted by vargue
                              The wife is not his goods or something taken from the husband as it was before Islam women have their own money and independent financial edema. And their own. It has the right to terminate the marital relationship by mutual consent. If the person betrayed his wife's response to her mind by applying God's limit. Good. The wife who cares about her husband and love him and provide him with everything he needs to cross his servant
                              Dude, I was making a joke. I get it.
                              NEVER ASSUME ANYTHING

                              Comment

                              Working...