MPC3002 Can't do a printer automatic colour calibration

[solorajder]

Re: MPC3002 Can't do a printer automatic colour calibration

With only 83 posts, 4 of them on this thread, in almost 10 years as a member you may not be a newbie but you are definitely not a quality or trusted technician. If you had already tried all the suggestions given in this thread, why did you fail to enumerate them two and a halt months ago in your first post? Of course in that length you have most likely forgotten what you really did.

Of course you know best who is a quality and trusted technician.
In 22 years of works as RICOH technician I have a lot of knowledge and experience but I'm not here to make useless post as you are or argue with all. You showed your knowledge in my older post
MPC4502 scan to mail default file name
Where I gave you a good advice:
If you don't have a clue, please be quiet.
Please don't answer on my posts any more.

Sent from my G8441 using Tapatalk

[Phil B.]

Re: MPC3002 Can't do a printer automatic colour calibration

Of course you know best who is a quality and trusted technician.
In 22 years of works as RICOH technician I have a lot of knowledge and experience but I'm not here to make useless post as you are or argue with all. You showed your knowledge in my older post
MPC4502 scan to mail default file name
Where I gave you a good advice:
If you don't have a clue, please be quiet.
Please don't answer on my posts any more.

Sent from my G8441 using Tapatalk

congrats on 22 years in the industry!

being a tech with 32+ years in the industry ( and Slim being in that group also) you might do better with less of a chip on your shoulder.

if you called Ricoh about this and didn't mention ALL of what was tried/done... you might get the same response from them.

We here at CTN like to see:

ALL things tried/done
samples in PDF format
any error codes
life/page counts
oem/gen supplies
if swapping parts what cali's/adjustments done after swap

all in the FIRST post in the thread.

[slimslob]

Re: MPC3002 Can't do a printer automatic colour calibration

Of course you know best who is a quality and trusted technician.
In 22 years of works as RICOH technician I have a lot of knowledge and experience but I'm not here to make useless post as you are or argue with all. You showed your knowledge in my older post
MPC4502 scan to mail default file name
Where I gave you a good advice:
If you don't have a clue, please be quiet.
Please don't answer on my posts any more.

Sent from my G8441 using Tapatalk

And you were just as rude and disrespectful then as you are now.

[solorajder]

Re: MPC3002 Can't do a printer automatic colour calibration

And you were just as rude and disrespectful then as you are now.

Just like you.

Sent from my G8441 using Tapatalk

[anothertech]

Re: MPC3002 Can't do a printer automatic colour calibration

We are still waiting to hear,

Did you put plain paper in tray one?

Can you see the printer in user tools?

Can you see the printer in service mode?

Does it still say "Setting Change" in the printer screen?

Did you empty the waste toner?

[solorajder]

Re: MPC3002 Can't do a printer automatic colour calibration

congrats on 22 years in the industry!

being a tech with 32+ years in the industry ( and Slim being in that group also) you might do better with less of a chip on your shoulder.

if you called Ricoh about this and didn't mention ALL of what was tried/done... you might get the same response from them.

We here at CTN like to see:

ALL things tried/done
samples in PDF format
any error codes
life/page counts
oem/gen supplies
if swapping parts what cali's/adjustments done after swap

all in the FIRST post in the thread.

I appreciate your advice.
I don't like to arguing with anyone, but some of forum members treating everyone in this forum as if we are newbie and stupid. This driven me crazy. If I can't help I will not answer to post or argue with him.
Sorry for my English, it's not my native language.

Sent from my G8441 using Tapatalk

[fshead]

Re: MPC3002 Can't do a printer automatic colour calibration

Sorry but I'm not a newbei. All of your suggestions was useless because I alleady tried it before I post a question.

Sent from my G8441 using Tapatalk

NOT looking to pick to pile on BUT
I hate when anyone posts a question and assumes WE KNOW all the things YOU DID but failed to tell us...........
my crystal ball was in the shop so you might want to communicate better......

[Phil B.]

Re: MPC3002 Can't do a printer automatic colour calibration

NOT looking to pick to pile on BUT
I hate when anyone posts a question and assumes WE KNOW all the things YOU DID but failed to tell us...........
my crystal ball was in the shop so you might want to communicate better......

yup...

I'm Crazy but not a damn mind reader either!

I guess he took my comment as a complement .. and not the DIG as intended.

[slimslob]

Re: MPC3002 Can't do a printer automatic colour calibration

We are still waiting to hear,

Did you put plain paper in tray one?

Can you see the printer in user tools?

Can you see the printer in service mode?

Does it still say "Setting Change" in the printer screen?

Did you empty the waste toner?

Keep waiting. He has been here for almost 10 years and still hasn't filled in anything on his(?) profile except to claim to be Male.