Aficio 400 Error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Blue Fin
    • Jun 2025
    #1

    Aficio 400 Error

    Hi,

    I was hoping someone could tell me where to begin looking for a problem I'm having with my Aficio 400. When I turn the machine on, after a few seconds the machine beeps and the display says to call a technician and error code SC 361.

    Thanks very much.
    Last edited by Guest; 01-26-2009, 06:53 PM. Reason: Error
    Tags: 400, aficio, calculator, error, gig, pay, sata, sensor error
    • schooltech
      School District Tech

      500+ Posts
      • Jun 2008
      • 504
      #2
      If the machine says to call a tech, it will give you a SC-xxx code, and the three numbers together will tell you what the machine sees as the problem. Find the numbers displayed and repost.
      Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

        Comment

        • schooltech
          School District Tech

          500+ Posts
          • Jun 2008
          • 504
          #3
          Repost with the SC-XXX code. Repeat post
          Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

            Comment

            • schooltech
              School District Tech

              500+ Posts
              • Jun 2008
              • 504
              #4
              Repost with a SC-xxx code. Oops...repeat post
              Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

                Comment

                • Blue Fin
                  #5
                  Sorry...the error code is SC-361

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22999
                      #6
                      This is probably too expensive to fix. Replace hard disk drive #2. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • Lagonda
                          Service Manager

                          Site Contributor
                          1,000+ Posts
                          • Aug 2008
                          • 1649
                          #7
                          Geez its been awhile since I worked on one of these!
                          SC361 says the hard drive isnt talking to the Image Processing Board.

                          Hard drives are cheap but the will only work with a 1 gig HDD. Doubt if you can find one these days as the smallest I've seen is a 60 gig.

                          But.....
                          Bitter experence tells me its the circuit board and if you can find one you will need to sell a kidney to pay for it!

                          Sorry to say its times to talk to Satans Little Helper, a photocopier salesman. Just remember to put new batteries in your calculator first!
                          At least 50% of IT is a solution looking for a problem.

                            Comment

                            • Blue Fin
                              #8
                              Thanks for all the help...even though it's all bad news.

                                Comment

                                • iMind
                                  Vacuum Cleaning Expert

                                  1,000+ Posts
                                  • Mar 2008
                                  • 1116
                                  #9
                                  sigpicWe can all Win, but at the end we all loose. Save the greyhound

                                    Comment

                                    • nodle
                                      Trusted Tech

                                      100+ Posts
                                      • Jan 2009
                                      • 142
                                      #10
                                      ASPER TSB # 38 upgrade the EX-IPU ROM part # A1337876 to version C.

                                      I had to do this aprox. a year ago. I did replace the HDD at the same time. If I remember correctly there was some thing in the manual or the gooses guide about dip switches to reset the code.



                                      FYI my customer still has theirs and it is working fine.

                                        Comment

                                        • tungnhung
                                          Technician
                                          • Dec 2008
                                          • 26
                                          #11
                                          Hard Disk Drive Error 2
                                          Revolver HP Sensor Error

                                            Comment

                                            Previous template Next
                                            Working...