MP 3352 Get's a "Functional error" after entering Auto Off mode

[copier tech]

Re: MP 3352 Get's a "Functional error" after entering Auto Off mode

I just set SP5730 to 0.
This machine does not have an SP5191

Thanks I'll let it sit 4 hours a see what happens.
I have sourced main bcu board in case nothing else works (haven't purchased yet).

Thanks let me know if you know that second SP to shut down.

Jeff in STL

Worth a try.

The SP5191 was from memory, so check the SP manual there’s an SP mode that keeps the controller from going to sleep.