Chatter on color only

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • BillyCarpenter
    Field Supervisor

    Site Contributor
    VIP Subscriber
    10,000+ Posts
    • Aug 2020
    • 16308
    #16
    Re: Chatter on color only

    Originally posted by blackcat4866
    I can tell that each of those specks is ONLY K of varying percentages, with no C, M, or Y. And it's in a pattern in the main-scan direction, like a laser writes.
    Brilliant.
    Adversity temporarily visits a strong man but stays with the weak for a lifetime.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22973
        #17
        Re: Chatter on color only

        Originally posted by slimslob
        I have not used it but it appears that the red circle is the pointer for what you want the tool to examine. ColorPic then shows you the breakdown of the color(s) of the area selected.
        Correct. Actually it's your cursor/arrow that points to the pixel, but the the cursor isn't captured in a screen shot, so I add the circle to help with the explanation.

        Interestingly, somehow Colorpic pointer has become mis-aligned with the cursor, low and to the right by about 50mm. If I change the scaling to 100% the pointer aligns again.
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          • slimslob
            Retired

            Site Contributor
            25,000+ Posts
            • May 2013
            • 37048
            #18
            Re: Chatter on color only

            Originally posted by blackcat4866
            Correct. Actually it's your cursor/arrow that points to the pixel, but the the cursor isn't captured in a screen shot, so I add the circle to help with the explanation.

            Interestingly, somehow Colorpic pointer has become mis-aligned with the cursor, low and to the right by about 50mm. If I change the scaling to 100% the pointer aligns again.
            What it needs is a calibration utility similar to Ricoh's, and probably other makes, touch screen calibration where it presents a number of dots on the screen and you click on them.

              Comment

              • BillyCarpenter
                Field Supervisor

                Site Contributor
                VIP Subscriber
                10,000+ Posts
                • Aug 2020
                • 16308
                #19
                Re: Chatter on color only

                I love these threads that get really deep into a subject.
                Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                  Comment

                  Previous 1 2 template Next
                  Working...