Ricoh MP C2500 Error Code SC672 on Startup.

[DRichard]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

In my experience this code generally means a controller replacement. Redoing thr connections won't hurt, but I can't recall once fixing that code without a replacement controller.

Sent from my SM-N770F using Tapatalk

...nor I.

[Rada]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Did you remove HDD and Ram at the same time? Not a good idea afaik..

In case the unit has a java/vm card you can try and remove it, too.

Dear Friends,
I put back every thing to its place and only remove a Big SD Memory Card on the back of the machine. and machine take a long time on welcome screen and turned on and I tried to make a copy it was working fine. buts it was not going to printer and scanner mode. I tried 3 to 4 time by restarting the machine. every time it take long time to start. but not going to printer and scanner options. then I just leave it for a while. then I just put the USB cable in the printer to check didn't connect to my laptop. then I saw that screen and every thing is off. and only power light in on. then I tried to restart it. but every time only Power light is turning on nothing else. Can you tell me what is the problem.

[Polarbear]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Hi

We're the switches on the controller board? Switch 1 dictates booting from flash memory if off or SD card when on.

Switch 2 to 8 should not be changed.

Did you change these with the machine powered on?

Sent from my SM-N770F using Tapatalk

[davel]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

The more you do without knowing what the heck you are doing the worse it will become. Put the old thing out of its misery and update to a newer model.

[Rada]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Hi

We're the switches on the controller board? Switch 1 dictates booting from flash memory if off or SD card when on.

Switch 2 to 8 should not be changed.

Did you change these with the machine powered on?

Sent from my SM-N770F using Tapatalk

I Always turn power off before changing any thing. but once by mistake I didn't off the machine and change switch No. 8.

[Rada]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

Dear Friends,
I put back every thing to its place and only remove a Big SD Memory Card on the back of the machine. and machine take a long time on welcome screen and turned on and I tried to make a copy it was working fine. buts it was not going to printer and scanner mode. I tried 3 to 4 time by restarting the machine. every time it take long time to start. but not going to printer and scanner options. then I just leave it for a while. then I just put the USB cable in the printer to check didn't connect to my laptop. then I saw that screen and every thing is off. and only power light in on. then I tried to restart it. but every time only Power light is turning on nothing else. Can you tell me what is the problem.

Brothers Please guide me further. need your help.

[TonerMunkeh]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

As it has been such a long time since I have seen one of these things, does it have a printer / scanner SD card?

[Rada]

Re: Ricoh MP C2500 Error Code SC672 on Startup.

As it has been such a long time since I have seen one of these things, does it have a printer / scanner SD card?

Yes.