Ricoh MP 1350; SC220 ...990,240

[Guccs]

Hi,

i have at customer a MP 1350 and they like it very much.
The machine displayed error SC220. I have replaced the LD unit (B234-1895) with a new one, enter the numbers at SP 2115- from 01 to 07, that labeled on it (there is 08 and 09 too, but on the label writen just 7 number, older technician friend said: leave there "0").
I've executed Auto process control (SP 2962), and the machine stopped with SC 990 and 240 together.
I check the HDD-s, both are good. Replaced the Polygon mirror motor, and motor control board, but the error still the same.
The sync detector clean, harness and connector checked...

Any idea?

Thanks.

[luca72]

Re: Ricoh MP 1350; SC220 ...990,240

Hi,



Any idea?

Thanks.

hi friend, I don't know specifically about that machine, but I tell you that something similar happened to me with an MP6002..the machine was old, and very used, I started with the sc220, and everything I did, added a new code: .. LOL .... it could take you days! .. in the end we put a new mp6503 ... make a good professional figure, with the customer .... make him an offer for a new machine .... "an offer that cannot be refused" *..LOL


* c.i.t. "the goodfather 2"