Ricoh MP C4503 Nic Port damaged and USB to RJ45 not working

[luca72]

Thanks again all. The customer chose the board repair option. So I am having that done today and will let you all know if that works. The wireless option suggestion is my backup plan.

after, let me know how much you spent for the repair, just for feedback

[patterson70]

Thanks again all. The customer chose the board repair option. So I am having that done today and will let you all know if that works. The wireless option suggestion is my backup plan.

Hello, thanks again to all for the advice. I had to order the NIC and it took over a week. Then I was able to get the repaired board installed within a couple of days after that and it is now working as it should. Customer can print and scan. I am now going to offer this service to anyone who needs this done. $375 would cover my cost and time for the NIC and the Board repair. Would need the board shipped to me. Does this sound reasonable?

[Saturn]

Thanks again all. The customer chose the board repair option. So I am having that done today and will let you all know if that works. The wireless option suggestion is my backup plan.

The Wireless LAN Kit Type M19, 417493, is much cheaper than a new controller board. Maybe you find a used one on eBay.