M C2000 FEEDER ISSUE

[Marwan]

greetings all,
When i place a Paper on feederto make a copy or scan a missing edge occurs of like 5 mm of the coppied or scanned paper ,however if i use the glass it goes perfectly fine.
PS: only with feed,cross feed works fine

Best regards

[sandmanmac]

Is the image through the feeder shifted to one side vs. the original or possibly enlarged, thus cutting of the image? Or is the image simply missing on one side?
If it's either of the former, then adjust the DF side-to- side registration and/or magnification in SP mode.