IMC 3000 SOP panel..how do i remove company logo from screen?

[fshead]

ok i am working on IMC series for the first time and dont want to brick a machine..
i picked up 9 lease returns to resell and a few have the service companies name and logo across the start up screen..
I can into user tools and WIM but not sure how to get screen back to factory default.
i did not see and factory resets on the SOP service mode with the ## befor the c..
saw one video using admin tools >erase all memory>format?

[ridgemill]

Have you tried the wipe data/factory reset in the SOP Android recovery menu?

To get to the menu, first go to User Tools/Settings > Screen Feature Settings > Screen Device Settings > Screen Startup Mode and set to Normal.

Shutdown the device (if you do not want to wait press and hold the Stop key and press the power button, keep it held for a few seconds after the "Shutting down..." message appears)
Remove the small cover on the side of the panel.
Press and hold both the small buttons (top and bottom) together, and turn on the device.
When the blue "Please wait..." screen appears, release both buttons, then press and hold the top and middle buttons.

The android screen will appear; navigate with the three buttons pressed earlier. They should be described as EX1 (top), EX2 (middle), and EX3 (bottom).


How to access recovery menu: Access Cheetah Recovery.pdf

[luca72]

ok i am working on IMC series for the first time and dont want to brick a machine..
i picked up 9 lease returns to resell and a few have the service companies name and logo across the start up screen..
I can into user tools and WIM but not sure how to get screen back to factory default.
i did not see and factory resets on the SOP service mode with the ## befor the c..
saw one video using admin tools >erase all memory>format?

Hi, Ricoh strongly advises against resetting the SOP in an RTB due to some internal settings, I suggest you upload your logo or another image instead of the one that is there now

[ridgemill]

Hi, Ricoh strongly advises against resetting the SOP in an RTB due to some internal settings, I suggest you upload your logo or another image instead of the one that is there now

I believe this is the RTB: RGene115b.pdf

Overwriting the existing image would be the better option.

[fshead]

thanks
i took my shot and formated setting via login>admin settings.
on reboot it had me format HDD and a few power ups later screen is normal..
i have been out of the loop with reselling so it takes a bit to relearn all this..
now i gotta see what the deal is with the toner cross over from the mpc3003 series..
gotta love rico suave..

[fshead]

lesson learned...

[fshead]

thanks ..