Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

[Samanator]

I'm looking for a Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly. The whole unit with belt and cleaning unit.

Any ideas where I can buy one. The places I have looked do not have them in stock.

[copier tech]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

I'm looking for a Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly. The whole unit with belt and cleaning unit.

Any ideas where I can buy one. The places I have looked do not have them in stock.

I do have one in stock I could send you but I guess the shipping & cost & times to USA is not worth it?

[slimslob]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

eBay has a Seller refurbished assembly for $199 if you want to trust eBay. D1496006 ricoh intermediate transfer belt assembly unit ITB | eBay

There is also Discount Copier Center. Ricoh Intermediate Transfer Belt (ITB) Assembly D1496006

[copier tech]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

eBay has a Seller refurbished assembly for $199 if you want to trust eBay. D1496006 ricoh intermediate transfer belt assembly unit ITB | eBay

There is also Discount Copier Center. Ricoh Intermediate Transfer Belt (ITB) Assembly D1496006

Or just replace the belt no real reason to replace the complete unit & keeps the costs down.

[Samanator]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

Thank you guys for all your comments. I have just been covered up this last week with two techs out sick.

I do not have very much Ricoh experience and the customer is paying for parts and labor. I think my time would be better spent replacing the whole unit instead of OTJ training on the installation of a belt and cleaning blade.

BTW copier tech, if I did get that one from you I would just pick it up myself. I'll see if my boss will pay for the trip and get back to you.

[MBZ6301]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

BTW copier tech, if I did get that one from you I would just pick it up myself. I'll see if my boss will pay for the trip and get back to you.

If your boss says yes to that I want a job at your place

You'd be better off fitting the belt. It might look like a pain when you're there but it's just a few screws and flipping back part of the unit after taking out two holding pins. There's a process to setting it up once it's back in the machine so give us a shout if you end up heading down that route.

[copier tech]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

Thank you guys for all your comments. I have just been covered up this last week with two techs out sick.

I do not have very much Ricoh experience and the customer is paying for parts and labor. I think my time would be better spent replacing the whole unit instead of OTJ training on the installation of a belt and cleaning blade.

BTW copier tech, if I did get that one from you I would just pick it up myself. I'll see if my boss will pay for the trip and get back to you.

You're welcome to collect however I know you could obtain one in The US!

[Samanator]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

Even if I get the whole unit, I am sure that there is a procedure in a service mode to run once it is installed.

I will need to know that. However I will reach out for that once I get a unit in hand.

BTW copier tech, even though my passport is up to date, my boss said no. He gave no reason, so I can't image why.

[slimslob]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

Even if I get the whole unit, I am sure that there is a procedure in a service mode to run once it is installed.

I will need to know that. However I will reach out for that once I get a unit in hand.

BTW copier tech, even though my passport is up to date, my boss said no. He gave no reason, so I can't image why.

Other than maybe applying setting powder, no.

[tsbservice]

Re: Ricoh MP C3003 Intermediate Transfer Belt (ITB) Assembly

Other than maybe applying setting powder, no.

Even setting powder isn't needed on KonMin. New whole units must be factory primed.
Ricoh are same if not even better I believe.