Ricoh Pro C5310 Faded/light prints or copies

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Babujoseph
    Technician

    Site Contributor
    • Aug 2020
    • 35
    #1

    Ricoh Pro C5310 Faded/light prints or copies

    Ricoh Pro C5310 Faded/light prints or copies

    Ricoh Pro C5310 very faded/light copies all color, replaced all drum and developer, ITB assembly, transfer unit. looks like an image from ITB, the image is not getting transferred to the paper please advise me. Meter count 20k color 22k black. enclosed a sample copy
    Attached Files
    Tags: c5310, copies, faded/light, pro, ricoh
    • Sashko
      Trusted Tech

      100+ Posts
      • Oct 2009
      • 110
      #2
      Re: Ricoh Pro C5310 Faded/light prints or copies

      Looks like the bad NVRAM on the controller board.
      Try to print the test page from Printer SP mode SP1-103-002 Color Chart
      Please send scanned image of the printed pages.

        Comment

        • kevslane
          Technician
          • Mar 2017
          • 24
          #3
          Re: Ricoh Pro C5310 Faded/light prints or copies

          Are you using the paper catalogue, I've had issues where this was corrupt causing similar issues?

          Sent from my SM-A526B using Tapatalk

            Comment

            • Babujoseph
              Technician

              Site Contributor
              • Aug 2020
              • 35
              #4
              Re: Ricoh Pro C5310 Faded/light prints or copies

              It's fixed was an easy fix finally

                Comment

                • copier tech
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2014
                  • 8120
                  #5
                  Re: Ricoh Pro C5310 Faded/light prints or copies

                  Originally posted by Babujoseph
                  It's fixed was an easy fix finally

                  After you replaced ALL the drums, developer, ITB ass'y, & transfer unit what was the 'easy fix?'
                  Let us eat, drink, and be merry, because tomorrow we may die!

                  For all your firmware & service manual needs please visit us at:

                  www.copierfirmware.co.uk - www.printerfirmware.co.uk
                  ​
                    😂 1

                    Comment

                    • Babujoseph
                      Technician

                      Site Contributor
                      • Aug 2020
                      • 35
                      #6
                      Re: Ricoh Pro C5310 Faded/light prints or copies

                      Originally posted by copier tech

                      After you replaced ALL the drums, developer, ITB ass'y, & transfer unit what was the 'easy fix?'

                      I downloaded the NVRAM onto the SD card. And cleared the NVRAM and uploaded the NVRAM from the SD card to the copier back.it fixed the problem. All good
                        👍 1

                        Comment

                        • gilbert
                          Technician
                          • Oct 2017
                          • 38
                          #7
                          Re: Ricoh Pro C5310 Faded/light prints or copies

                          Originally posted by Babujoseph
                          I downloaded the NVRAM onto the SD card. And cleared the NVRAM and uploaded the NVRAM from the SD card to the copier back.it fixed the problem. All good
                          You download the NVram into an SD card from which site?.
                          please explain briefly

                            Comment

                            • slimslob
                              Retired

                              Site Contributor
                              25,000+ Posts
                              • May 2013
                              • 37052
                              #8
                              Re: Ricoh Pro C5310 Faded/light prints or copies

                              Originally posted by gilbert
                              You download the NVram into an SD card from which site?.
                              please explain briefly
                              From the C5310 to the SD card. Instructions are in the service manual. If you do not have or cannot understand the service manual, you should not be even trying to work on a Production machine.
                                👍 1

                                Comment

                                • Morse
                                  Junior Member
                                  • Oct 2021
                                  • 5
                                  #9
                                  Drum nicks

                                    Comment

                                    Previous template Next
                                    Working...