Ricoh MP C2004 registration issue?

[copiertec]

Re: Ricoh MP C2004 registration issue?

Well I went back and first thing I did was remove the transfer belt cleaning unit and vacuumed it out, then I cleaned the ID sensors and it is working good no more jamming and all the colors are back in alignment. I did inform the customer that they will be needing a black pcu soon and they did break a paper guide that I need to order and replace. Thanks for the help.

[copiertec]

Re: Ricoh MP C2004 registration issue?

mamma mia! what a mess!...in my opinion there is something wrong there!...is the PM counter real?
however the ID sensors are the ones in the photo, you have to clean all 3 slides, then try to do this in sequence


sp 2-111-004 forced line adjustment
sp 2-194-007 check registration 0=ok 1=ng
sp 2-194-(010 to 013) check music result for each sensor
0=not executed
1=ok (they must all be 1!)
2=unable to execute
3=number of line less than the model
4=out of range
P.S
Personally, they seem like more PCDUs that need replacing

[ATTACH=CONFIG]60091[/ATTACH]

Thank you, luca72.