White line

[imaginemoko]

i guess the machine has a strong fluorecent lamp on top of it, or the light is directly on the optics so every scanning it absorb the light.... try to move the machine.

[E Winter]

Yeah that does totally look like a neon room illumination above the copier. Switch out all lights and run a test copy with cover open again...

[YHEL23]

Manny thanks to all of you guys.... Yap is the florescent lamp above the copier cause the problem...I always do the sky shot after replaced the drum...

[KopyKat]

This may sound too simple....Are you saying that this ONLY shows up on sky shots? Or does it show up with the cover down and large solids? The reason I ask this is that you say it does not show on text. I have seen this Exact pattern on sky shots when there is a florescent lamp above the copier. I may be just talking out of my butt again.

Thanks for reporting the solution.

Had us going there for a while....

Can I take my Keep It Simple Bow now?

[pspahr]

Take that bow KopyKat. I used that same image on a new tech to see if he could figure it out. Didn't much like the guy, never did show him what I did to 'fix' it.

[KopyKat]

I used that same image on a new tech to see if he could figure it out. Didn't much like the guy, never did show him what I did to 'fix' it.

You sound like my kind of people! Nothing is more fun than driving a cocky technician crazy with head games. And I admit, I have done it more than once or twice.

[Cipher]

Manny thanks to all of you guys.... Yap is the florescent lamp above the copier cause the problem...I always do the sky shot after replaced the drum...

Hehe crap I was far of the mark on this one, sorry dude.

Meh I would of spotted it if I was in front of the MFD LOL.