MPC 2500 - B&W and Color

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • phabran
    Technician
    • Nov 2009
    • 32

    #16
    Just cutting the edge didn't work. We compared and tested both cyan and yellow connectors and the pins order doesn't matches. Changing the pins order and it's done! Working fine!

    Comment

    • spaceman99
      Senior Tech

      100+ Posts
      • Jul 2009
      • 174

      #17
      HI
      Dikes post kills me man, GREAT .............. any ways try this link it may be usefull as i think the drums are made the same way. hope it helps

      Comment

      • knightfall
        Senior Tech

        500+ Posts
        • Jul 2006
        • 633

        #18
        I think your referring to the next generation of models up the mpc2500/3000/3500/4500 all have same pin configuration, the next generation of models mpc2800/3300 has the last 2 pins switched.
        Get your facts first, and then you can distort them as much as you please.

        Comment

        • Fearless V K
          Senior Tech

          500+ Posts
          • May 2007
          • 620

          #19
          Or maybe Europe has swapped pins on the 2500's?
          Don't take that toner with me!

          Comment

          • CableGuy
            Impulse Drive Engineer

            250+ Posts
            • Oct 2008
            • 417

            #20
            What part number ( drum Unit ) did you use, just out of interest? The pins don't need to be swapped here in the UK, which I guess is the same for the rest of Europe.

            Comment

            • phabran
              Technician
              • Nov 2009
              • 32

              #21
              In deed, the test we did was on a MPC2800. Perhaps 2500 is the same. I will confirm tomorrow.

              Comment

              • Fearless V K
                Senior Tech

                500+ Posts
                • May 2007
                • 620

                #22
                no need to swap pins on the 2500.
                Don't take that toner with me!

                Comment

                • FrankieB
                  Technician
                  • Dec 2009
                  • 12

                  #23
                  this is to funny i love it, the dyke thing that is, but this info is very useful, I thought that there was no difference except about 275.00 dollars, and the connector.

                  Comment

                  Working...