Savin 2070dp Scanner Slamming

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrfuser
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2007
    • 1617
    #1

    Savin 2070dp Scanner Slamming

    Okay, scanner continues to slam back on this one. We checked all mirrors, pullys, etc. Replaced MCU board, still errors out and slams. Any ideas?

    Thanks!

    Kelly

    kelly@pcbmonline.com
    Tags: 207, back, break, code 12, counter, email, errors, etc, font, line, mcu, mirrors, okay, one, pulley, replaced, savin, sca, scan, scanner, screws, set, size, tech, time
    • Fearless V K
      Senior Tech

      500+ Posts
      • May 2007
      • 620
      #2
      Have you checked the pulley set screws? These break or back out.
      Don't take that toner with me!

        Comment

        • teebee1234
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jul 2008
          • 1670
          #3

            Comment

            • msaeger
              Trusted Tech

              250+ Posts
              • Sep 2008
              • 333
              #4
              I had one that replacing the NVRAM chip on fixed it. This one was really weird because every time the counter sheet was printed out the next copy would be a slam. Doing the NVRAM clear didn't fix it either.

                Comment

                • Vulkor
                  Senior Tech

                  500+ Posts
                  • Jun 2009
                  • 946
                  #5
                  Originally posted by msaeger
                  I had one that replacing the NVRAM chip on fixed it. This one was really weird because every time the counter sheet was printed out the next copy would be a slam. Doing the NVRAM clear didn't fix it either.
                  That is an odd one, but as someone mentioned above I go with the Screw Seen this happen on the old Savin 2050 (I think)

                    Comment

                    Previous template Next
                    Working...