75 results in 0.0110 seconds.
-
Ricoh afico 2075 SC490
Codes out, will not reset. I know that this is an exhaust fan error code, but am unsure where it is located. Does anyone have a rough location or parts... -
Toshiba dp 80/85f part needed
Hoping someone still has P/N 12079584- it is the plastic spring latch for the top cover on these machines- released by pushing the button on the side.... -
Ricoh 2075 .. Msg " Please wait.. " unable to photocopy...
Good day .
Aficio 2075 .. after on the machine , i'm only able to photocopy one time ,
after that the touch panel will only appear... -
require part nmber DC2045 series
Hi I require the part number of Belt Support Roll of the Exit Module of DC2045 series . The part number of the belt is 600K93550 and on its on two rods... -
Toshiba Enablers GM-2040, 2060, 2061, 2070, 2071
I am looking to purchase Toshiba Enablers (model numbers 2040, 2060, 2061, 2070, 2071) in large quantities. - The more available the better -
The... -
Toshiba e-studio 207 network board not initializing
dear guy,
can any on help in this part i need it urgent, i have e-studio 207 and i fix network card on it but its dose not initialize its... -
IR 2270, 0108 & 0207 jams
New cassette rollers and right door pads. Some copies that don't jam have a slight fold/bend toward the trail edge. Tried incresing and decreasing LOOP... -
Used Ricoh machines
-
E-Studio 207 E03 Error, inspite of no paper jam, fuser seems ok
i am getting E03 error in toshiba e-Studio 207,
there is no paper jam,
fuser is ok , themister is ok
kindly help
regards ... -
Newbie
Hi everone,
I am just joined the forum and found it is very helpfull.
regards -
-
60 to 75 cpm 1060/2060
How can we change the copying speed of an aficio 1060 to 1075? And how about a 2060 to 2075?
-
Toshiba Estudio 207 Broken Registration
Hello Every One,
I am facing problem in Toshiba e studio 207 Broken Registration error message appear
i am here in bahrain ... -
Savin 2070 ADF Problems
We have a Savin 2070 in which the ADF is acting erratically--stopping on feed once at 1", other times more or less than that. Any ideas? This machine...
