If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
E-Studio 207 E03 Error, inspite of no paper jam, fuser seems ok
Re: E-Studio 207 E03 Error, inspite of no paper jam, fuser seems ok
Hello,
Search carrefuly onto fuser cover the actuator for exit sensor.
Is over there a spring who move the actuator in normal position when the paper has passed .
It seems the spring is out from the actuator.
Good luck.
Comment