ID 2 @Remote

[Philinghorn]

Thank you Ricoh-ono.

[Ricoh-ono]

If only NVRAM is replaced then input original serial in SP5811-001.

If NVRAM and controller replaced then input original serial in SP5811-001. You will also need to restore individual certificate with Rescue mode by initializing SP5870-003.

[Philinghorn]

Hello,

Any @Remote wizards out there ?
We have a machine where we have had to replace the NVRAM, all os OK apart from the ID2, its not the correct format. Does anybody know if & how we change the ID2 back to what is should be ?
This machine is using the embedded version of @Remote & its a MPC4500 if it makes a difference.

Thanks inadvance for any replies.