Af3260 not copy

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • liontech
    Technician
    • Dec 2010
    • 12
    #1

    Af3260 not copy

    HI guys

    I have a af3260, enabled me well, but not copy.
    When turned on does not make the process control and motor does not start nor any heat the fuser.
    Not mark any code

    Please help!
    thanks!
    Tags: 260, af3260, code, color, control, copy, fuser, heat, motor, power supply, start
    • Iommanxman
      Trusted Tech
      • Aug 2009
      • 180
      #2
      Are all the covers etc closed? If this is the case sounds like the Power supply unit needs replacing and/or check the fuses on the power supply.

        Comment

        • liontech
          Technician
          • Dec 2010
          • 12
          #3
          The problem was the AC Drive. I had a bad sector.
          Thank you very much for your time and help!

            Comment

            Previous template Next
            Working...