Hi all i have a pro1106 randomlly jamming from tray 6 where it is misfeeding.I have replaced the rollers and the torque limiter which didnt fix it.My next idea is the grip motor or tray lift motor anyone had any similar problems/suggestions would be great.
-
-
What is th JamCode in ur Display (58)? or another
When its really only the Mag 6 change Rolls and Torque Limitter
When not u need a special Firmware from Ricoh -
Always find it handy to swap the feed station from the tray that has the problem with the one under/above it and see if the fault moves with itComment
Comment